Raymarine hsb2 series Owner's Handbook Manual page 123

Chapter 5: Standard Chart Operations
Press the alphanumeric key that contains the first letter or number of the
desired waypoint name. The selection bar moves to the entry starting with
that letter or number.
If more than one entry begins with that character, the selection bar moves
to the first one in the list. Each time the same key is pressed, the selection
bar moves to the entry starting with the next character on the key. If no
entry exists for that character, the entry starting with the nearest previous
character is selected. If the numeric value of the key is input when no
numeric entry exists, the selection bar moves to the first alpha entry.
For example, let's say we have four waypoints named ORION,
POLARIS, QUANTUM, and 6-GUN. Pressing the opq/6 key four suc-
cessive times would select the waypoints ORION (O), POLARIS (P),
QUANTUM (Q), then 6-GUN (6). However, pressing the rst/7 key four
successive times would select QUANTUM for the first three key presses
because entries beginning with the associated letters do not exist and Q is
the next previous beginning letter. The fourth press of the rst/7 key would
select 6-GUN because no entries begin with a 7 and 6 is the next previous
beginning number.
2. Use the ins key like the fishfinder's ENTER key, to close the Waypoint
List.
The del key and left and right arrow keys do not function in select mode.
Editing Entries in the Waypoint, Route, or Track Lists
You can also use the ST80 Navigator Keypad to edit an existing item or to
name a new item in the Waypoint List, Route List, or Track List. You first must
enter the edit mode for the list you want to modify. Methods for editing each
list are described in the respective sections of this chapter.
To edit an item in a list using the Navigator:
1. If necessary, use the right and left arrow keys to move the cursor to the
desired character position.
2. Press an alphanumeric key until the desired character is displayed. Each
time you press one of these keys in succession, the next character on that
key is input.
or
Use the up and down arrow keys to scroll through the list of alpha,
numeric, and special characters until the desired character is displayed
(just as you would with the fishfinder's trackpad). Note that you must use
this method to input special characters; they are not available using the
alphanumeric keys.
Use the del key to insert a space, if required.
5-17