Raymarine hsb2 series Owner's Handbook Manual page 113

Chapter 5: Standard Chart Operations
To select a time, use the trackpad to move the cursor to the required time.
To change the day press PREV. DAY, DAY or TODAY, as required. Alternatively,
press SET DAY; to change date, use the trackpad to move the cursor left/right to
select the character and up/down to increase/decrease the value.
The graph and tide data will be updated accordingly.
Nearest
To obtain the information for the nearest port facility:
1. Move the cursor to the required position – this can be anywhere on the chart
and may be over an object – then press ENTER to display the object infor-
mation pop-up.
2. Press the NEAREST soft key. The port facility symbols are displayed.
3. Use the trackpad to highlight the required facility, then press ENTER.
4. The nearest ports providing that facility are listed with distance and bear-
ing to the port.
If you highlight a port name then press ENTER, details for that facility are
displayed. Typical port data is shown in Figure 5-4.
Press CLEAR to return to the port list.
Press CLEAR to return to the facility symbols.
5. Press CLEAR to return to the default display.
Figure 5-4: Nearest Port - Typical Data
5-7