Editing The Waypoint Details - Raymarine hsb2 series Owner's Handbook Manual

Chapter 5: Standard Chart Operations
To remove the waypoint data box and soft keys either:
Move the cursor away from the waypoint, or press CLEAR.
To display the waypoint details from the waypoint list:
Select the waypoint in the list as described above.
MARKS
The details for the selected waypoint are displayed in the lower half of the
window. Temperature, depth, date and time are included (if available) for
WAYPOINT
LIST
waypoints placed at the vessel position.
To remove the Waypoint List and return to the default soft key display, press
CLEAR twice.

Editing the Waypoint Details

You can change the name, symbol and position of any waypoint.
To edit a waypoint:
1. Select the waypoint, using the cursor or the waypoint list, as previously
described. The waypoint soft keys are displayed.
EDIT
2. Press the EDIT WAYPOINT soft key. The Edit Waypoint soft keys are dis-
WAYPOINT
played:
SYMBOL
3. To edit the symbol, press the SYMBOL soft key.
Use the soft keys, shown in the following illustration, to highlight the
required symbol, then press ENTER to confirm the selection.
Press ENTER or CLEAR to return to the default soft keys.
4. To edit the waypoint name, press the NAME soft key. The NAME WAYPOINT
window is displayed.
Using the trackpad to edit the name:
iv. Use the left or right side of the trackpad to move the cursor to the char-
v. Then use the top or bottom of the trackpad to scroll through the charac-
NAME POSITION
SELECT SYMBOL
acter you wish to change.
ters.
5-13
D4166-1
D4178-1