Removing A Chart Card; Displaying The Chart Data - Raymarine hsb2 series Owner's Handbook Manual

Chapter 5: Standard Chart Operations
5. Close the card cover until it clicks shut, to prevent water entering the dis-
play unit.
Figure 5-1:

Removing a Chart Card

To remove a chart card:
1. Open the card cover, at the lower left of the display front panel.
2. Press on the card you wish to remove, and move the top of the card to the
left to clear the retaining pegs.
The card will spring half-way out, enabling you to grip the card and remove
it from the slot.
3. Remember to close the card cover so that it clicks shut, to prevent water
from entering the card reader assembly.

Displaying the Chart Data

The new chart information will be displayed when you move the cursor into an
area covered by the new chart or, if it is already in the area, change the range
scale.
If an
hsb
by the repeater display. To see the chart you may need to zoom or pan, to
redraw the chart area to the screen.
Inserting the Chart Card
Series repeater display is connected, the chart can also be accessed
2
5-3
D4158-2