Cisco RVS4000 - Gigabit Security Router Administration Manual page 68

Setting Up and Configuring the Router
QoS
Cisco RVS4000 Security Router with VPN Administrator Guide
Bandwidth
This section lets you specify the maximum bandwidth provided by the ISP on the
WAN interface, for both the upstream and downstream directions.
Bandwidth Management Type
Type The desired type of bandwidth management, either Rate Control or Priority
(default). Depending on your selection, the lower portion of the window displays
either the Rate Control section or the Priority section.
Rate Control
Service Select the service from the drop-down menu. If it does not contain the
service you need, click Service Management to add the service.
IP Enter the IP address or IP range you need to control. The default is zero which
includes all internal IP addresses.
Direction Select Upstream for outbound traffic or Downstream for inbound
traffic.
Mini. Rate Enter the minimum rate for the guaranteed bandwidth.
Max. Rate Enter the maximum rate for the guaranteed bandwidth.
Enable Check this box to enable this Rate Control Rule.
Add to list After a rule is set up, click this button to add it to the list. The list can
contain a maximum of 15 entries.
Delete selected application Click this button to delete a rule from the list.
5
68