Cisco RVS4000 - Gigabit Security Router Administration Manual page 59

Setting Up and Configuring the Router
VPN
Cisco RVS4000 Security Router with VPN Administrator Guide
Config Click Edit to change the tunnel's settings. Click Trash to delete all of the
tunnel's settings.
Tunnel(s) Enabled Displays the total number of currently enabled tunnels.
Tunnel(s) Defined Displays the number of tunnels currently defined. This number
will be greater than the Tunnels Enabled field if any defined tunnels have been
disabled.
VPN Clients Status
No. Displays the user number from 1 to 5.
Username. Displays the username of the VPN Client.
Status Displays the connection status of the VPN Client.
Start Time Displays the start time of the most recent VPN session for the
specified VPN Client.
End Time Displays the end time of a VPN session if the VPN Client has
disconnected.
Duration Displays the total connection time of the latest VPN session.
Disconnect Check the Disconnect box at the end of each row in the VPN Clients
Table and click the Disconnect button to disconnect a VPN Client session.
5
59