Wall Option - Cisco RVS4000 - Gigabit Security Router Administration Manual

Getting Started with the RVS4000 Router
Placement Options
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
Cisco RVS4000 Security Router with VPN Administrator Guide
To place the router vertically, follow these steps.
Locate the left side panel of the router.
With the two large prongs of one of the stands facing outward, insert the short
prongs into the little slots in the router and push the stand upward until the stand
snaps into place.
Repeat step 2 with the other stand.

Wall Option

To mount the Cisco RVS4000 router on the wall, follow these steps.
Determine where you want to mount the router and install two screws (not
supplied) that are 2-9/16 in. apart (approximately 64.5 mm).
With the back panel pointing up (if installing vertically), line up the router so that the
wall-mount crisscross slots on the bottom of the access point line up with the two
screws.
2-9/16
Wall
mount
slots
Place the wall-mount slots over the screws and slide the router down until the
screws fit snugly into the wall-mount slots.
4
21