Cisco RVS4000 - Gigabit Security Router Administration Manual page 31

Setting Up and Configuring the Router
Setup
Cisco RVS4000 Security Router with VPN Administrator Guide
PPPoE
Some DSL-based ISPs use PPPoE (Point-to-Point Protocol over Ethernet) to
establish Internet connections. If you connect to the Internet through a DSL line,
check with your ISP to see if they use PPPoE. If they do, enable PPPoE.
PPPoE
User Name and Password
ISP.
Connect on Demand: Max Idle Time
Internet connection after it has been inactive for a specified period of time (Max
Idle Time), and then automatically re-establish the connection as soon as you
attempt to access the Internet again. To activate Connect on Demand, select the
Connect on Demand option and enter in the Max Idle Time field the number of
minutes of inactivity that must elapse before your Internet connection is
terminated automatically.
Enter the User Name and Password provided by your
You can configure the router to cut the
5
31