Cisco RVS4000 - Gigabit Security Router Administration Manual page 188

Cisco ProtectLink Web Service
How to Use the Service
Cisco RVS4000 Security Router with VPN Administrator Guide
Approved URLs
You can designate up to 20 trusted URLs that will always be accessible.
Enable Approved URL list
option.
URL(s) to approve Enter the trusted URL(s). Separate multiple URLs with
semicolons (";").
Add To add the URLs, click Add.
Approved URLs list
trash can icon.
Approved Clients
You can designate up to 20 trusted clients (local IP addresses) that will always
have access to filtered URLs.
Enable Approved Client list
IP addresses/range
multiple URLs with semicolons (";"). For a range of IP addresses, use a hyphen ("-").
Example: 10. 1 . 1 .0-10. 1 . 1 . 1 0.
Add To add the IP addresses or ranges, click Add.
Approved Clients list
To delete an IP address or range, click its trash can icon.
URL Overflow Control
Specify the behavior you want if there are more URL requests than the service can
handle.
Temporarily block URL requests
URL requests, the overflow will be held back until they can be processed. This is
the default setting.
Temporarily bypass Cisco URL verification for requested URLs
many URL requests, the overflow will be allowed without verification.
Click Save to save your changes, or click Cancel to undo them.
To set up a list of always accessible URLs, select this
The trusted URLs are displayed. To delete a URL, click its
To set up a list of trusted clients, select this option.
Enter the appropriate IP addresses or ranges. Separate
The IP addresses or range of trusted clients are displayed.
(recommended setting) If there are too many
E
If there are too
188