Cisco RVS4000 - Gigabit Security Router Administration Manual page 171

Gateway-to-Gateway VPN Tunnel
Configuration when the Remote Gateway Uses a Static IP Address
STEP 3
Cisco RVS4000 Security Router with VPN Administrator Guide
RV082 IPSec Setup Settings
1. If you need more detailed settings, click Advanced Settings. Otherwise, click
Save.
Configuration of PC 1 and PC 2.
Verify that PC 1 and PC 2 can ping each other (refer to Windows Help for more
information). If the computers can ping each other, then you know the VPN tunnel is
configured correctly.
D
171