Dial A Number From The Directory; Remove A Name And Number From The Directory - AT&T 984 User Manual

❘ ❘ ❘
❘ ❘
w w w w w w w w w w w w
w w w w w w w w
w w w
w w

Dial a Number from the Directory

1 Find the entry for the number you wish to
call by following the directions under "Review
Directory Entries" on page 79.
2 Press the LINE button for the line you wish
to use. The displayed number will be dialed
in the mode (speakerphone or headset) you
programmed (see"Set Automatic Mode" on
page 35).
— OR —
Press E. The screen display includes the
number and
phone will dial the call on the Prime Line in
the mode (speakerphone or headset) you
programmed (see"Set Automatic Mode" on
page 35.
Remove a Name and Number from
the Directory
1 Find the entry for the number you wish to
call by following the directions under "Review
Directory Entries" on page 79.
2 When the entry you wish to delete is displayed,
press r. The screen display includes
to the next directory entry.
NOTE: Once an entry is removed from the directory,
it cannot be removed.
. Press E again, the
. The screen automatically advances
81