Select The Ringer Type - AT&T 984 User Manual

❘ ❘ ❘
❘ ❘
❖ ❖ ❙ ❖
❖ ❖
❙ ❙
❙ ❙
w w w
w w
28

Select the Ringer Type

You can choose a ring pattern for incoming phone calls.
NOTE: Incoming intercom calls use Ringer Type 1
and cannot be changed.
1 Press E to begin feature setup.
Press - until the screen display includes
2
3 Press E. The screen display includes
Press - until the screen display includes
4
5 Press E. The screen display includes
Press < or > to change the ringer type
6
(
7 When the desired setting for this line is shown,
press - to save the your choice and
move to the next line with its ringer type.
8 Repeat Steps 6 and 7 to set ringer types
for other lines on this phone (
9 When you are finished setting the ringer
type, press - until the screen display includes
.
10 Press E. The screen display includes
11 Proceed to Step 4 on page 29 to set the
next feature (Delay Ring)
— OR —
Press and hold E to return to the idle
screen.
NOTE: You can exit feature setup and return to the
idle screen any time. Simply press and hold E.
.
.
.
and the current setting.
... ) for the line shown.
.
... ).