Turn Toll Saver On Or Off - AT&T 984 User Manual

❘ ❘ ❘
❘ ❘
❖ ❖ ❙ ❖
❖ ❖
❙ ❙
❙ ❙
w w w
w w

Turn Toll Saver On or Off

When Toll Saver is turned on, the answering system picks
up incoming calls within eight seconds if there is at least
one new message. When there are no new messages, the
answering system picks up the incoming call in the time
you set as the Answer Delay (see "Set Answer Delay" on
page 45 for details).
1 Press E to begin feature setup.
2 Press - until the screen display incudes
3 Press E. The screen display includes
4 Press - until the screen displays includes
and the current setting.
5 Press < or > to toggle between
6 When the desired setting is shown, press - to
save your choice. The screen display includes
7 Proceed to Step 5 on page 50 to set the next
feature (Remote Code)
—OR—
Press and hold E to return to the idle
screen.
NOTE: You can exit feature setup and return to the
idle screen any time. Simply press and hold E.
.
.
.
and .
49