Dial A Number From The Directory; Remove A Name And Number From The Directory; Caller Id - AT&T 992 User Manual

0992_CIB_1ATT_FINAL_022105 2/22/04

Dial a Number from the Directory

1.
Press D.
2. Press E and
3.
Press E. The screen display includes
4.
Press E to dial the number on the screen.
The call is dialed in the mode (speakerphone or
headset) programmed (see Set Preferred
Mode on page 16) using the Primary Line
programmed (see Set Primary Line on page 14).
❚ ❚
❚
— OR —
Lift the handset or press K or H,
then press E. The telephone automatically
selects an idle line and dials the call.
— OR —
Press a LINE button to select a line, then
press E. The call is dialed in the mode
(speakerphone or headset) programmed
(see Set Preferred Mode on page 16).
The screen displays the number while
dialing.
Remove a Name and Number
from the Directory
1. Find the entry for the number to be deleted
by following the directions under Review
Directory Entries on page 40.
2. When the desired entry is displayed, press
r. The screen briefly displays the
directory entry and
❚ ❚
❚
automatically returns to the first directory entry.
42
4:46 PM Page 42
+ or - to view entries.
.
Then, it

CALLER ID

This telephone has a Caller ID feature which works with Caller Identification
service provided by your local telephone company. There is a fee for this
service, and it may not be available in all areas. This telephone can provide
information only if both you and the caller are in areas offering Caller
Identification service, and if both telephone companies use compatible
equipment.
When using this telephone with Caller ID service, you can see the name and
telephone number of the caller before answering the telephone. If you
subscribe to the combined Caller ID with Call Waiting, you can see
the name and telephone number of the caller even when on another call.
This service may be called by different names (such as Caller ID with Visual
Call Waiting) by different telephone companies and may not be available
in all areas.
NOTE: You must subscribe to the combined Caller ID with Call Waiting
as a single service to see Caller ID information for a Call Waiting call.
Check with your telephone company for availability.
This telephone assigns each incoming call a number from 1 to 99. The most
recent call will have the highest number. (For example, if two calls have been
received, call number 02 is the most recent.) When the call history is full, the
oldest call information is automatically deleted to make room for new
incoming call information.
The format of telephone numbers displayed depends on the Home and Local
Area Codes programmed. (See Home Area Code and Local Area
Codes on page 3 for explanations of area codes. See Program Home
and Local Area Codes on page 21 for programming instructions.) If the
call is from within your Home Area Code, the screen displays only the
7-digit number (without an area code). If the call is from one of the Local
Area Codes, the screen displays 10 digits (area code plus the 7-digit number).
If the call did not come from any of the area codes programmed, 1) telephone
numbers with 10 or more digits will automatically have a 1 inserted and
displayed before the number and, 2) telephone numbers with fewer than 10
digits will be displayed without a 1.
43