Before You Begin; Parts List; Tools Needed - AT&T 984 User Manual

BEFORE YOU BEGIN

Parts List

Your box should include:
USER'S MANUAL
AT&T Small Business System
Speakerphone with
Digital Answering System and
Caller ID Call Waiting 984
Part 1 — Important
Product Information
© 2004 Advanced American Telephones. All Rights Reserved.
AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones.
AT&T Small Business System
Speakerphone with Digital Answering
System and Caller ID Call Waiting 984
To connect with your 984 answering system:
1 Dial your telephone number from a touch tone phone
outside the phone system.
2 If Auto-Attendant answers, enter the extension number
you wish to reach after the announcement plays.
continued on page 2
Two seven-foot twisted pair
line cords
Base unit with wedge attached

Tools Needed

You will also need a small Phillips head screw driver to install your phone.
2
This User's
Manual
Part 2
Please also read
Wallet
Card
QUICK START GUIDE
AT&T Small Business System
Speakerphone with Digital Answering
System and Caller ID Call Waiting 984
This Quick Start Guide provides basic instructions. For additional
installation options and complete instructions which allow you
to use all features of this phone, refer to your AT&T AT&T Small
Business System Speakerphone with Digital Answering System and
Caller ID Call Waiting 984 User's Manual, Part 2.
INSTALLATION
Installation of a DSL splitter and an AT&T Z800A filter may be
required to use the advanced features of this telephone if you
have DSL (Digital Subscriber Line) service. Please see "DSL Users"
starting on page 4 of your User's Manual, Part 2 for details.
If you are installing multiple phones in your phone system, you
must install and program one set at a time. Each phone MUST
be assigned a unique extension number.
Battery Installation
Install a 9V alkaline battery (purchased separately) in order to use some features
of this telephone in the event of a power failure. If power fails and
a working battery is installed, all four lines of this phone will work only to
answer calls with the handset or headset, and to dial calls using the key pad and
the One Touch or Redial features. No other features will work until power is
restored.
1 Remove the wedge from the underside of the base unit. Press
on the tabs and pull the wedge away from the phone.
continued on page 2
Eight-inch line cord
Power adapter
Quick
Start
Guide
1
Handset
Coiled
handset cord