Record An Outgoing Announcement - AT&T 984 User Manual

❘ ❘ ❘
❘ ❘
❖ ❖ ❖ ❙ ❙ ❙
❖ ❖ ❙ ❙
w w w
w w
w w w w w w
w w w w

Record an Outgoing Announcement

NOTE: If you choose not to record an outgoing
announcement, the answering system plays a
pre-recorded announcement. The pre-recorded
announcement for
YOUR MESSAGE AFTER THE TONE
Auto-Attendant outgoing announcements are
described in the ANSWERING SYSTEM
-
AUTO ATTENDANT OPERATION
manual, beginning on page 110.
1 Press d to access the answering system.
2 Press - until the screen display includes
3 Press E. The screen display includes
and the current announcement setting.
4 Press < or > to choose the outgoing
announcement you want to record (
5 When the desired announcement is shown,
press - until the screen display includes
6 Press E. After the system beeps, speak
toward the phone in a normal tone of voice
without any background noise. While you are
recording the screen display includes
7 To stop recording, press E. The system
automatically plays back your announcement.
NOTE: To exit D-TAD and return to the idle screen
at any time, press d.
is, "H
." The pre-recorded
section of this
.
,
).
and the selected announcement.
and the selected announcement.
, P
ELLO LEASE LEAVE
,
, or
103