Remove Messages; Record A Memo - AT&T 984 User Manual

❘ ❘ ❘
❘ ❘
w w w
w w
w w w
w w
❘ ❘ ❘
❘ ❘
w w w
w w
w w w
w w
108

Remove Messages

Remove a Selected Message
You can remove a message as you listen to it. Press
r while the message you want to erase is playing.
The screen display includes
number you erased.
The answering system immediately plays the next message.
Remove all messages
1 Press d to access the answering system.
2 Press - until the screen display includes
3 Press E. The screen display includes
4 Press E again within three seconds to
confirm the command. The screen display briefly
includes
include
NOTE: If you try to remove all messages when
you have new (unreviewed) messages, you will hear
an error tone. The D-TAD will not remove
any messages.
NOTE: To exit D-TAD and return to the idle screen
at any time, press d.

Record a Memo

You can record a memo to be played back later with the
incoming messages.
1 Press d to access the answering system.
2 Press - until the screen displays includes
3 Press E. After the beep, begin to record
your memo. The screen displays includes
4 Press E to stop recording. The screen
displays the number of messages and
.
NOTE: To exit D-TAD and return to the idle screen
at any time, press d.
.
.
then, quickly changes to
.
.
.
and the message