❘ ❘
❘
❘ ❘
❖ ❖ ❙
❖
❙ ❙
❖ ❖
❙ ❙
w w
w
w w
w
w w w
w w w
w w
w w
w w
w w
Remove an Outgoing
Announcement
NOTE: When you erase your announcement, the
system returns to the pre-recorded announcement
until you record a new one.
1
Press d to access the answering system.
2
Press - until the screen display includes
3
Press E. The screen display includes
and the current announcement setting.
4
Press < or > to choose the outgoing
announcement you want to record (
5
When the desired announcement is shown,
press E. The announcement starts to play
and the screen display includes
the selected announcement.
6
While the outgoing announcement plays, press
r twice to erase the announcement.
NOTE: To exit D-TAD and return to the idle screen
at any time, press d.
Monitor Incoming Calls
When a caller is recording an incoming message, you can
hear it through the speaker if you have programmed the
Monitor to be on (see "Turn Monitor On or Off" on
page 53).
Intercept an Incoming Message
If D-TAD Intercept is turned on (see "Turn D-TAD
Intercept On or Off" on page 54), you can pick up a call
while the caller is recording a message. You must use a
phone connected to the same incoming line as the caller
is using. At a system phone, answer the call as usual.
To answer the call at a non-system phone, press #1.
The D-TAD stops recording when you pick up the call.
.
,
.
,
, or
and
105