Battery installation Before using the telephone, you should install four AA alkaline batteries (purchased separately). You can use the telephone without batteries to dial and receive calls. However, the line lights and the automatic redial feature will not work, and the speakerphone and optional headset may not work properly in all conditions.
Tabletop installation After installing the batteries, if you wish to use the telephone on a tabletop, flip the wall mounting bracket upward. A single two-line wall jack If there is a single two-line wall jack, use only the black (4-connector) line cord. Plug one end into the jack labeled L1 or L1/L2 on the back of the telephone base.
Page 4
Tabletop installation Two one-line wall jacks If there are two one-line wall jacks, use both long line cords. Plug one end of the clear line cord into the jack labeled L1 or L1/L2 on the back of the telephone base. Then, plug the other end into the wall jack for Line 1. Plug one end of the black line cord into the jack labeled L2 or DATA on the back of the telephone base.
Quick reference guide One-touch keys LOWER Press to dial the number Press LOWER, then stored. t h e d e s i re d o n e - touch key to dial the number stored in lower locations. LINE 1, LINE 2 Press, then lift handset HOLD to make or answer a call...