Cisco 3750G - Catalyst Integrated Wireless LAN Controller Configuration Manual page 66

Default Settings After Initial Switch Configuration
–
–
No Smartports macros are defined. For more information, see
•
Macros."
VLANs
•
–
–
–
–
–
–
–
IEEE 802.1Q tunneling and Layer 2 protocol tunneling are disabled. For more information, see
•
Chapter 17, "Configuring IEEE 802.1Q and Layer 2 Protocol Tunneling."
STP, PVST+ is enabled on VLAN 1. For more information, see
•
MSTP is disabled. For more information, see
•
• Optional spanning-tree features are disabled. For more information, see
Optional Spanning-Tree Features."
• Flex Links are not configured. For more information, see
the MAC Address-Table Move Update Feature."
DHCP snooping is disabled. The DHCP snooping information option is enabled. For more
•
information, see
• IP source guard is disabled. For more information, see
and IP Source Guard."
Dynamic ARP inspection is disabled on all VLANs. For more information, see
•
"Configuring Dynamic ARP Inspection."
IGMP snooping is enabled. No IGMP filters are applied. For more information, see
•
"Configuring IGMP Snooping and MVR."
IGMP throttling setting is deny. For more information, see
•
Snooping and MVR."
The IGMP snooping querier feature is disabled. For more information, see
•
IGMP Snooping and MVR."
MVR is disabled. For more information, see
•
Port-based traffic
•
–
–
Catalyst 3750 Switch Software Configuration Guide
1-14
Flow control is off. For more information, see
Characteristics."
PoE is autonegotiate. For more information, see
Characteristics."
Default VLAN is VLAN 1. For more information, see
VLAN trunking setting is dynamic auto (DTP). For more information, see
"Configuring VLANs."
Trunk encapsulation is negotiate. For more information, see
VLANs."
VTP mode is server. For more information, see
VTP version is Version 1. For more information, see
No private VLANs are configured. For more information, see
VLANs."
Voice VLAN is disabled. For more information, see
Chapter 22, "Configuring DHCP Features and IP Source Guard."
Broadcast, multicast, and unicast storm control is disabled. For more information, see
Chapter 25, "Configuring Port-Based Traffic Control."
No protected ports are defined. For more information, see
Traffic Control."
Chapter 11, "Configuring Interface
Chapter 11, "Configuring Interface
Chapter 12, "Configuring Smartports
Chapter 13, "Configuring VLANs."
Chapter 13, "Configuring
Chapter 14, "Configuring VTP."
Chapter 14, "Configuring VTP."
Chapter 16, "Configuring Private
Chapter 15, "Configuring Voice VLAN."
Chapter 18, "Configuring STP."
Chapter 19, "Configuring MSTP."
Chapter 21, "Configuring Flex Links and
Chapter 22, "Configuring DHCP Features
Chapter 24, "Configuring IGMP
Chapter 24, "Configuring IGMP Snooping and MVR."
Chapter 25, "Configuring Port-Based
Chapter 1 Overview
Chapter 13,
Chapter 20, "Configuring
Chapter 23,
Chapter 24,
Chapter 24, "Configuring
OL-8550-02