Default System Message Logging Configuration; Disabling Message Logging - Cisco 3750G - Catalyst Integrated Wireless LAN Controller Configuration Manual
Software configuration guide
Hide thumbs
Also See for 3750G - Catalyst Integrated Wireless LAN Controller:
- Configuration manual (40 pages) ,
- Getting started manual (49 pages)
Table of Contents
Advertisement
Configuring System Message Logging
Default System Message Logging Configuration
Table 30-2
Table 30-2
Feature
System message logging to the console
Console severity
Logging file configuration
Logging buffer size
Logging history size
Time stamps
Synchronous logging
Logging server
Syslog server IP address
Configuration change logger
Server facility
Server severity
Disabling Message Logging
Message logging is enabled by default. It must be enabled to send messages to any destination other than
the console. When enabled, log messages are sent to a logging process, which logs messages to
designated locations asynchronously to the processes that generated the messages.
Beginning in privileged EXEC mode, follow these steps to disable message logging. This procedure is
optional.
Command
Step 1
configure terminal
Step 2
no logging console
Step 3
end
Step 4
show running-config
or
show logging
Step 5
copy running-config startup-config
Disabling the logging process can slow down the switch because a process must wait until the messages
are written to the console before continuing. When the logging process is disabled, messages appear on
the console as soon as they are produced, often appearing in the middle of command output.
Catalyst 3750 Switch Software Configuration Guide
30-4
shows the default system message logging configuration.
Default System Message Logging Configuration
Chapter 30
Default Setting
Enabled.
Debugging (and numerically lower levels; see
Table 30-3 on page
No filename specified.
4096 bytes.
1 message.
Disabled.
Disabled.
Disabled.
None configured.
Disabled
Local7 (see
Table 30-4 on page
Informational (and numerically lower levels; see
Table 30-3 on page
Purpose
Enter global configuration mode.
Disable message logging.
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
Configuring System Message Logging
30-10).
30-14).
30-10).
OL-8550-02
Advertisement
Chapters
Table of Contents
Troubleshooting
