Access List Numbers - Cisco 3750G - Catalyst Integrated Wireless LAN Controller Configuration Manual

Configuring IPv4 ACLs
The software supports these types of ACLs or access lists for IPv4:
•
•
These sections describe access lists and how to create them:
•
•
•
•
•
•
•
•

Access List Numbers

The number you use to denote your ACL shows the type of access list that you are creating.
lists the access-list number and corresponding access list type and shows whether or not they are
supported in the switch. The switch supports IPv4 standard and extended access lists, numbers 1 to 199
and 1300 to 2699.
Table 32-1
Access List Number
1–99
100–199
200–299
300–399
400–499
500–599
600–699
700–799
800–899
900–999
1000–1099
1100–1199
1200–1299
1300–1999
2000–2699
Catalyst 3750 Switch Software Configuration Guide
32-8
Standard IP access lists use source addresses for matching operations.
Extended IP access lists use source and destination addresses for matching operations and optional
protocol-type information for finer granularity of control.
Access List Numbers, page 32-8
ACL Logging, page 32-9
Creating a Numbered Standard ACL, page 32-10
Creating a Numbered Extended ACL, page 32-11
Resequencing ACEs in an ACL, page 32-15
Creating Named Standard and Extended ACLs, page 32-15
Using Time Ranges with ACLs, page 32-17
Including Comments in ACLs, page 32-19
Access List Numbers
Type
IP standard access list
IP extended access list
Protocol type-code access list
DECnet access list
XNS standard access list
XNS extended access list
AppleTalk access list
48-bit MAC address access list
IPX standard access list
IPX extended access list
IPX SAP access list
Extended 48-bit MAC address access list
IPX summary address access list
IP standard access list (expanded range)
IP extended access list (expanded range)
Chapter 32 Configuring Network Security with ACLs
Supported
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Table 32-1
OL-8550-02