Cisco 3750G - Catalyst Integrated Wireless LAN Controller Configuration Manual page 472

Configuring MSTP Features
If your switch is a member of a switch stack, you must use the spanning-tree mst [instance-id] cost cost
Note
interface configuration command instead of the spanning-tree mst [instance-id] port-priority priority
interface configuration command to select a port to put in the forwarding state. Assign lower cost values
to ports that you want selected first and higher cost values to ports that you want selected last. For more
information, see the
Beginning in privileged EXEC mode, follow these steps to configure the MSTP port priority of an
interface. This procedure is optional.
Command
Step 1 configure terminal
Step 2
interface interface-id
Step 3
spanning-tree mst instance-id port-priority priority
Step 4 end
Step 5
show spanning-tree mst interface interface-id
or
show spanning-tree mst instance-id
Step 6 copy running-config startup-config
The show spanning-tree mst interface interface-id privileged EXEC command displays information
Note
only if the port is in a link-up operative state. Otherwise, you can use the show running-config interface
privileged EXEC command to confirm the configuration.
To return the interface to its default setting, use the no spanning-tree mst instance-id port-priority
interface configuration command.
Catalyst 3750 Switch Software Configuration Guide
19-20
"Configuring Path Cost" section on page
Purpose
Enter global configuration mode.
Specify an interface to configure, and enter interface
configuration mode.
Valid interfaces include physical ports and port-channel
logical interfaces. The port-channel range is 1 to 48.
Configure the port priority.
•
•
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
19-21.
For instance-id, you can specify a single instance, a
range of instances separated by a hyphen, or a series of
instances separated by a comma. The range is 0 to
4094.
For priority, the range is 0 to 240 in increments of 16.
The default is 128. The lower the number, the higher
the priority.
The priority values are 0, 16, 32, 48, 64, 80, 96, 112,
128, 144, 160, 176, 192, 208, 224, and 240. All other
values are rejected.
Chapter 19 Configuring MSTP
OL-8550-02