Switch Spanning Tree Group Information - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Interface Manual
Ethernet blade switch for c-class bladesystem browser-based interface reference guide
Hide thumbs
Also See for GbE2c - Blc Layer 2/3 Fiber SFP Option:
- Command reference manual (175 pages) ,
- Application manual (165 pages) ,
- Cli reference manual (153 pages)
Table of Contents
Advertisement
Table 15
Switch Spanning Tree Groups Information controls
Control
Bridge Max Age
Bridge Forward Delay
Bridge Aging Time
Select a Spanning Tree Group number to display detailed information.
Switch Spanning Tree Group Information
To display the following form, go to the Switch Spanning Tree Groups Information form. Select a Spanning Tree
Group number.
Description
Specifies, in seconds, the maximum time the bridge waits without receiving a configuration
bridge protocol data unit before it reconfigures the STP network. If the bridge is not the root
bridge, it uses the
value of the root bridge.
MaxAge
This command does not apply to MSTP.
Specifies, in seconds, the amount of time that a bridge port has to wait before it changes from
learning state to forwarding state. If the bridge is not the root bridge, it uses the
value of the root bridge.
Delay
This command does not apply to MSTP.
Specifies, in seconds, the amount of time the bridge waits without receiving a packet from a
station before removing the station from the Forwarding Database.
Forward
Dashboard 32
Advertisement
Table of Contents
