To Draw An Outline Using The Input Point Dialog Box - Brother PS-300B Instruction Manual

and "60" in the Length cell.
Example 3
To specify a point at the position 120° and 50.2 mm to the left from the previous point,
input "120" in the Angle cell and "-50.2" in the X cell.
Example 4
To specify a point at the position -80° and 60.5 mm up in the Y direction, input "-80"
in the Angle cell and "60.5" in the Y cell.

To draw an outline using the Input Point dialog box:

You can draw an outline manually or by specifying the coordinates of points configuring the
outline on the design area.
1. Do one of the following:
On the Shape drop-down menu, click one of the eight commands in the above table
for drawing the desired shape of outline.
89/164