Displaying The Desired Part In The Center Of The Main Window; To Enlarge Design Element(S) To Fill The Window; To Display The Sewing Area In The Size Fit In The Window - Brother PS-300B Instruction Manual

You can adjust the view of the design to its actual size.
Do one of the following:
On the View drop-down menu, click Zoom. On the Zoom sub- menu, click Actual
Size.
Click the Actual Size icon
To enlarge design element(s) to fill the window (View-Zoom-Fit To Window,
):
You can enlarge the view of the selected design element(s) to fill the window.
Do one of the following:
On the View drop-down menu, click Zoom. On the Zoom sub- menu, click Fit To
Window.
Click the Fit To Window icon
NOTE: If no design element is selected, all the design element(s) in the design area are enlarged
to fill the window.
To display the sewing area in the size fit in the window (View-Zoom-Fit
Sewing Area To Window,
You can adjust the size of the sewing area of the machine model you specified so that it will fit
within the window. This command is available only when the sewing area of a specified
machine model is displayed.
NOTE: The sewing area of a specified machine model can be displayed by the setting in
Model Setting on the Tools drop-down menu.
Do one of the following:
On the View drop-down menu, click Zoom. On the Zoom sub- menu, click Fit
Sewing Area To Window.
Click the Fit Sewing Area To Window icon

3-3-2. Displaying the desired part in the center of the main window

You can move the design area up and down or from side to side to display the desired part in
the center of the main window.
To move the design area up and down:
Do one of the following:
in the toolbar.
in the toolbar.
):
112/164
in the toolbar.
Machine