Brother PS-300B Instruction Manual page 47

2. Select BAS311A from the Machine Model Name drop-down list.
The Preview window shows how the selected model's sewing area and the design area will
appear.
3. In the Reference Point box, specify the reference point for positioning the sewing area
frame in the design area.
Also, make settings in the Change color group box if you prefer.
4. Click the OK button to apply the specified settings.
5. While holding
The sewing area frame is placed at the center of the data created in the above procedure.
NOTE: The sewing area frame can be placed at any position. Refer to
sewing machine model
6. If necessary, adjust the size of the data according to the sewing area frame.
(Refer to "3-5-3. Resizing design
2-3-4. Exporting the data to a sewing machine
You can export the data you created to the storage media of a sewing machine.
(BAS311A uses the floppy disc drive FD300.)
NOTE: In order to connect to FD300, the COM Port must be correctly set in
Tools drop-down menu.
the keyboard's Shift key, click on the design area.
down
for details.
elements" for details.)
47/164
3-7-5. Specifying a
Option Setting on the