Brother PS-300B Instruction Manual page 65

Extension
emb
dxf
dst, .dsb, .dsz
if2
To import a file:
1. Do one of the following:
On the File drop-down menu, click Import.
Click the Import icon
The Open PS -300B File dialog box appears.
2. In the drop-down list at the top left corner of the dialog box, select the format for the file
that you want to import.
3. In the list in the left window of the dialog box, select the folder containing the desired file.
The images of the available files contained in the folder are previewed in the right window of the
dialog box.
NOTE: The images of files in the format designated in step 2 only are previewed.
4. Select and click on the file that you want to open, then click the OK button.
5. Click on the point where you want to place the imported file in the design area of the
main window.
The imported file is placed at the specified point.
Follow the instructions below to place the imported file correctly:
1. If a sewing area of a specified machine model is set in the design area:
While holding down the keyboard's Shift key, click the left mouse button. The
center of the imported file aligns with the center of the sewing area.
While holding down the keyboard's Ctrl key, click the left mouse button. The
center of the imported file aligns with the original point of the specified machine
model.
Description
Brother embroidery file
Auto CAD DXF file
TFD stitch file
Satra format
in the toolbar.
65/164