Rotating Design Elements; To Rotate Design Elements By Specifying The Rotation Angle - Brother PS-300B Instruction Manual

Cancel
NOTE: The right side in horizontal direction is positive, the left negative; the upper part in the
vertical direction is positive, the lower negative.
As for angles, the horizontal line (the X axis) indicates 0
direction are 0 to 360
When you have made the settings that conflict, the PS-300B automatically applies the
values in the following priority.
1. X and Y-coordinates
2. X-coordinate + Angle
3. Y-coordinate + Angle
4. Length + Angle

3-5-5. Rotating design elements

Design elements can be rotated in any direction by specifying the rotation angle. You can also
rotate design elements by dragging the rotation handle (the square that extends from the
selection frame around the selected elements).
To rotate design elements by specifying the rotation angle (Modify-
Rotate):
1. Select one or more design elements.
A selection frame of "dashes" appears around the design element(s).
2. On the Modify drop-down menu, click Rotate. On the Rotate sub- menu, do one of the
following:
To rotate the design element(s) clockwise, click the desired rotation angle, +30°, +45°,
+60°, +90° or +180°.
To rotate the design element(s) counterclockwise, click the desired rotation angle,
-30°, -45°, -60°, -90° or -180°.
To specify the rotation angle and direction for the design element(s), click Other.
Click this button to cancel the values you have inputted in this
dialog box.
, and angles in the counterclockwise direction are 0 to -360
°
139/164
, angles in the clockwise
°
.
°