Moving Design Elements To The Specified Position - Brother PS-300B Instruction Manual

(b) Input values in the X and Y input boxes to specify the absolute coordinates of the
start point for the mirror axis, and then click the OK button.
(c) Press any of the numeric keys on the keyboard to display the Input Point dialog
box again.
(d) Input values to specify the end point for the mirror axis, and then click the OK
button.
A symmetrical copy of the design elements is created on the basis of the mirror axis.
NOTE: Refer to

3-5-8. Moving design elements to the specified position

You can move the desired design elements to the specified position.
To move design element(s) (Modify-Move To,
1. Select one or more design elements.
A selection frame of "dashes" appears around the design element(s).
2. Do one of the following:
On the Modify drop-down menu, click Move To.
Click the Move To icon
The Input Point dialog box appears.
3. Do any of the following:
Check the Relative Coordinate check box to move using the current position as the
base of relative coordinates.
Clear the Relative Coordinate check box to move using absolute coordinates. (Base
point: X=0, Y=0)
Input values in the X and Y input boxes to specify the position where the design
elements are to be moved.
4. Click the OK button.
The design elements are moved to the specified position.
NOTE: Refer to How to use the Input Point dialog box
How to use the Input Point dialog box
in the toolbar.
):
if necessary.
145/164
for inputting values.