To Rotate Design Elements Manually - Brother PS-300B Instruction Manual

The Rotate dialog box appears.
In the Direction group box, select the desired rotation direction, and in the Angle
group box, input the desired rotation angle. Then, click the OK button to apply the
specified settings.
NOTE: To apply the new settings without closing the Rotate dialog box, click the Apply
button.
To rotate design elements manually (Modify-Rotate By Drag,
You can rotate the selected design elements manually by dragging the rotation handle. The
center of rotation is fixed to the center of the selected design elements.
1. Select one or more design elements.
A selection frame of "dashes" appears around the design element(s).
2. Do one of the following:
On the Modify drop-down menu, click Rotate By Drag.
Click the Rotate By Drag icon
The center point of rotation is displayed in red at the center of the selected design elements, and
the rotation handle also appears in red on the circumference of the rotation circle.
in the toolbar.
140/164
):