Design Elements (Types Of Lines, Points, Etc.) - Brother PS-300B Instruction Manual

46. Swap Start/End Point
47. Change Data Type
48. Resize
49. Copy To
50. Move To
51. Pivot
52. Align To Sewing Area Center
53. Align To Coordinate Original Point

Design elements (types of lines, points, etc.)

On PS-300B, stitch data used on the sewing machine will be automatically generated from
outline data. You can also create stitch data directly without creating outline data. However, in
general, you will create outline data first. You can create both outline and manual stitch data in
the same window, although it is possible for PS-300B to display the data separately. You can
recognize outline data, manual stitch data, manual feed data, and codes respectively in the
design area, by their shapes, colors and so on as indicated below:
In the normal display mode:
7/164