To Display The Design Elements To Fill The Window; To Hide The Reference Window - Brother PS-300B Instruction Manual

To display the Reference window, do one of the following:
On the View drop-down menu, click Reference Window.
Click the Reference Window icon
The Reference window appears.
NOTE: The Reference window also shows the elements that are not displayed in the design area
When the sewing area of a specified machine model is displayed in the design area, the
frame of the sewing area is also shown in the Reference window.

To display the design elements to fill the window:

Clear the Fit Sewing Area check box on the Reference window.
NOTE:
If the Fit Sewing Area check box is checked:
When the sewing area is larger than the design elements, the sewing area will fit to fill
the window, and when the design elements' size is larger than the sewing area, the design
elements will fit to fill the window.
To hide the Reference window, do one of the following:
Click the Close button [X] on the upper right corner of the Reference window.
by the setting in Show/Hide
114/164
in the toolbar.
on the View drop-down menu.