Brother PS-300B Instruction Manual page 157

Trace
Import From
/Export To
Machine
Scale
dialog box.
NOTE:
If the connection length exceeds the maximum stitch length, it will be
automatically changed to a feed.
(Software default: the maximum stitch length)
Specify the settings for the Trace tool.
Pitch:
Type the desired value in the box to change the pitch for manual stitches
created with the Trace tool.
(Setting range: 0.05 to 12.7 mm, software default: 0.2 mm)
Margin:
Type the desired value in the box to change the precision for tracing with the
Trace tool.
(Setting range: 0.0 to 1.0, software default: 0.2 mm)
NOTE:
If the trace pitch is less than 2.0 mm, the setting range will be 0.0 to half of
the pitch.
Specify settings for floppy disk drive FD-300, ROM writer PRW-1, and the
drive for CF card writer.
FD-300 Com Port:
Select the desired COM port for floppy disk drive FD300 from the Com Port
list box.
CF Drive:
Select the drive connecting with the CF (Compact Flash) writer from the CF
Drive list box. (The A and C drives cannot be selected.)
PRW-1(SW-1) Com Port:
Select the desired COM port for ROM writer PRW-1 from the Com Port list
box.
PRW-1(SW-1) Baudrate:
Select the desired baud rate for ROM writer PRW-1 from the Baudrate list
box. (Software default: 115200 bps)
ROM File:
Check this box to convert a ROM file in the MOT format when exporting it
to a ROM writer, so that you can write the ROM file to a ROM writer which
is not the PRW-1.
NOTE:
To find the COM port, click the Windows' Start button, and then click
Control Panel. In Control Panel, double -click the System icon, click the
Hardware tab, and then click the Device Manager button. In the Device
Manager dialog box, click a plus sign to the left of Ports (COM & LPT), and
then check the COM port number of the floppy disk drive (FD-300) and the
ROM writer (PRW-1(SW-1)).
Set the resolution for displaying the design area.
[Setting range: 0.005 to 0.05 mm, software default: 0.025 mm (This means
157/164