Brother PS-300B Instruction Manual page 86

You can draw an outline by specifying the coordinates of points configuring the outline on the
design area.
1. Do one of the following:
On the Shape drop-down menu, click one of the eight commands in the above table
for drawing the desired shape of outline.
In the toolbar, click the icon for one of the eight commands in the above table for
drawing the desired shape of outline.
When the pointer is moved into the design area, its shape changes to the one corresponding to the
selected command.
NOTE: For details on drawing the desired shape of outline, refer to
for drawing the desired
2. Press any of the numeric keys on the keyboard.
The Input Outline (Stitch, Feed) dialog box appears.
3. Make necessary settings and input values in the Input Outline (Stitch, Feed) dialog box
to create the desired shape of outline.
Item/group box
Outline Type group box
outlines".
The selected outline type is shown in the drop-down list. You
can change the outline type by selecting the desired type from
86/164
"3-2-2 Selecting commands
Description