Reading Data From A Sewing Machine; Connecting The Design Elements So That They Are Joined At A Point - Brother PS-300B Instruction Manual

3. Click to select the start point of the second element.
The selected point turns black.
4. Click to select the end point of the first element.
The second element moves so that the specified two points are overlapped.

Connecting the design elements so that they are joined at a point:

You can connect the end points of both design elements allowing you to convert two design
elements into one.
1. Using the Select Point tool
(On the list box that appears, select the proper one.)
The selected point turns black.
2. Click Connect on the Modify-Point drop-down sub- menu (or the context menu that
appears when right-clicking), or the Connect icon
3. Click the same point again.
The two points are connected into one.

2-4-8. Reading data from a sewing machine

Read the desired data from a sewing machine ROM by using a ROM reader/writer and save it
as a ROM file in the computer.
, click to select the end point of the first design element.
57/164
in the toolbar.