Rom Error; System Board Failure - HP ProLiant BL620c - G7 Server Troubleshooting Manual

Proliant g4/5/6 servers
Hide thumbs Also See for ProLiant BL620c - G7 Server:
Table of Contents

Advertisement

101-ROM Error

Audible Beeps: 1 long, 1 short
Possible Cause: System ROM checksum.
Action: Run Insight Diagnostics
indicated.
101-Option ROM Checksum Error...
...An add-in card in your system is not working correctly. If you have recently added new hardware, remove it and
see if the problem remains. If this message goes away after you remove your new hardware, there may be a
problem with the add-in card.
Audible Beeps: 1 long, 1 short
Possible Cause: An expansion board in the system is not working correctly.
Action: If you have recently added new hardware, remove it and see if the problem persists. If this
message goes away after you remove the new hardware, there may be a problem with the expansion
board. Review the expansion board documentation, and then try reinstalling the board.

102-System Board Failure

Audible Beeps: None
Possible Cause: 8237 DMA controllers, 8254 timers, and similar devices.
CAUTION:
board. If you believe the system board requires replacement, contact HP Technical Support
("Contacting
Action: Replace the system board. Run the server setup utility.
102-System Board Failure, CMOS Test Failed.
Audible Beeps: None
Possible Cause: 8237 DMA controllers, 8254 timers, and similar devices.
CAUTION:
board. If you believe the system board requires replacement, contact HP Technical Support
("Contacting
Action: Contact an authorized service provider for system board replacement.
102-System Board Failure, DMA Test Failed
Audible Beeps: None
Possible Cause: 8237 DMA controllers, 8254 timers, and similar devices.
CAUTION:
board. If you believe the system board requires replacement, contact HP Technical Support
("Contacting
Action: Contact an authorized service provider for system board replacement.
("HP Insight
Diagnostics" on page 75) and replace failed components as
Only authorized technicians trained by HP should attempt to remove the system
HP" on page 173) before proceeding.
Only authorized technicians trained by HP should attempt to remove the system
HP" on page 173) before proceeding.
Only authorized technicians trained by HP should attempt to remove the system
HP" on page 173) before proceeding.
Error messages 126

Advertisement

Table of Contents
loading

This manual is also suitable for:

ProliantProliant 100 series

Table of Contents