Pre-Diagnostic Steps; Important Safety Information; O Post Error Messages And Beep Codes (On; Symbols On Equipment - HP ProLiant BL620c - G7 Server Troubleshooting Manual

ADU error messages (on page 91)
o
POST error messages and beep codes (on page 115)
o
Event list error messages (on page 157)
o
HP BladeSystem infrastructure error codes
o
on page 161)
Port 85 codes and iLO messages (on page 165)
o

Pre-diagnostic steps

WARNING:
information in the server documentation before removing, replacing, reseating, or modifying
system components.
IMPORTANT:
apply to the server you are troubleshooting. Refer to the server documentation for information
on procedures, hardware options, software tools, and operating systems supported by the
server.
Review the important safety information (on page 13).
1.
Gather symptom information (on page 16).
2.
Prepare the server for diagnosis (on page 16).
3.
Use the Start diagnosis flowchart (on page 25) to begin the diagnostic process.
4.

Important safety information

Familiarize yourself with the safety information in the following sections before troubleshooting the server.
Important safety information
Before servicing this product, read the Important Safety Information document provided with the server.

Symbols on equipment

The following symbols may be placed on equipment to indicate the presence of potentially hazardous
conditions.
To avoid potential problems, ALWAYS read the warnings and cautionary
This guide provides information for multiple servers. Some information may not
This symbol indicates the presence of hazardous energy circuits or electric shock
hazards. Refer all servicing to qualified personnel.
WARNING: To reduce the risk of injury from electric shock hazards, do not open this
enclosure. Refer all maintenance, upgrades, and servicing to qualified personnel.
This symbol indicates the presence of electric shock hazards. The area contains no
user or field serviceable parts. Do not open for any reason.
WARNING: To reduce the risk of injury from electric shock hazards, do not open this
enclosure.
("HP BladeSystem p-Class infrastructure error codes"
Getting started 13