Security Menu - Intel SCB2 - Server Board Motherboard Product Manual

Advanced Chipset Control Submenu
Feature
Wake on Ring
Wake on LAN
Wake on PME
Wake on RTC Alarm

Security Menu

Enabling the Supervisor Password field requires a password for entering BIOS Setup. The
passwords are not case sensitive.
Feature
User Password is
Administrator
Password is
Set
Administrative
Password
Set User
Password
User Access
Level
Password on
Boot
Secure Mode
Timer
Secure Mode Hot
Key
(CTRL-ALT- )
Secure Mode
Boot
Configuration Software and Utilities
Option Description
Disabled Legacy wake only: Determines the action of the system when
the system power is off and the modem is ringing.
Enabled
Disabled Legacy wake only: Determines the action of the system when
a LAN wake up event occurs.
Enabled
Disabled Legacy wake only: Determines the action of the system when
a PCI Power Management Enable wake up event occurs.
Enabled
Disabled Legacy wake only: Determines the action of the system when
a RTC Alarm Wake up event occurs.
Enabled
Choices Description
Installed Informational Only.
Not Installed
Installed Informational Only.
Not Installed
Press <Enter> When the <Enter> key is pressed, a password prompt appears. Press
ESC key to abort. Once set, this can be disabled by setting it to a null
string or by clearing password jumper on server board.
Press <Enter> When the <Enter> key is pressed, a password prompt appears. Press
ESC key to abort. Once set, this can be disabled by setting it to a null
string or by clearing password jumper on server board.
Limited Sets the User access level for various BIOS setup functions.
No Access
View Only
Full
Disabled If your password is set and enabled, the system prompts you for a
Enabled password before it boots.
1 minute Period of PS/2 keyboard and/or mouse inactivity specified for secure
2 minutes mode to activate. A password is required for secure mode to function.
5 minutes This option only appears on the screen after a "user" password has
10 minutes been entered.
20 minutes
60 minutes
120 minutes
Z Key assigned to invoke secure mode features cannot be enabled
L unless at least one password is set.
This option only appears on the screen after a "user" password has
been entered.
Disabled System boots in secure mode. The user must enter a password to
Enabled unlock the system.
This option only appears on the screen after a "user" password has
been entered.
continued
49