Problems With Application Software; Bootable Cd-Rom Is Not Detected - Intel SCB2 - Server Board Motherboard Product Manual

Problems with Application Software

If you have problems with application software, do the following:
q Verify that the software is properly configured for the system. See the software installation and
operation documentation for instructions on setting up and using the software.
q Try a different copy of the software to see if the problem is with the copy you are using.
q Make sure all cables are installed correctly.
q Verify that the server board jumpers are set correctly. See Chapter 5.
q If other software runs correctly on the system, contact your vendor about the failing software.
If the problem persists, contact the software vendor's customer service representative for help.

Bootable CD-ROM Is Not Detected

Check the following:
q Is the BIOS set to allow the CD-ROM to be the first bootable device?
q Check cable connections.
q Verify CD is bootable in another known good CD-ROM drive. (Especially if the CD
is a copy.)
90 Intel Server Board SCB2 Product Guide