Main Menu; Bios Setup Menu Display - Intel SCB2 - Server Board Motherboard Product Manual

Table 8.

BIOS Setup Menu Display

When you see this:
An option is grayed out and not accessible
The rest of this section lists the features that display onscreen after you press <F2> to enter BIOS
Setup. We do not describe all the option choices because (1) a few are not user selectable but
displayed for your information, and (2) many of the choices are relatively self-explanatory.

Main Menu

Feature
System Time
System Date
Floppy Disk A:
Hard Disk Pre-delay
Primary IDE Master
Primary IDE Slave
Processor Settings
Language
Primary IDE Master and Slave Submenu
Feature Choices
Type None
Auto
Multi-Sector Disabled
Transfers 2, 4, 8, or 16 sectors
LBA Mode Disabled
Control Enabled
PIO Mode Standard
1, 2, 3, 3/DMA 1,
4, 4/DMA 2
Ultra DMA Mode 2
Mode
Mode 4
Configuration Software and Utilities
What it means:
You cannot change or configure the option in that
menu screen for one of the following reasons:
Choices
HH:MM:SS
MM/DD/YYYY
Not Installed
1.44/1.25 MB/1.2 MB 3½"
2.88 MB 3½"
Disabled
Enabled
Press <Enter>
Press <Enter>
Press <Enter>
English (US)
French
Spanish
German
Italian
Description
Informs the system to ignore this drive.
Allows the system to attempt auto-detection of the drive type.
Determines the number of sectors per block for multisector
transfers.
For Type Auto, this field is informational only.
For Type Auto, this field is informational only.
Displays the method for moving data to/from the drive.
This field is informational only.
The option is auto-configured or auto-detected.
The field is informational only.
The field is password protected and is accessible
only by the User or Administrator
Description
Sets the system time.
Sets the system date.
Selects the diskette type.
Causes the BIOS to insert a delay before
attempting to detect IDE drives in the
system
Enters submenu.
Enters submenu.
Enters submenu.
Selects which language BIOS displays.
45