Description; Server Board Features - Intel SCB2 - Server Board Motherboard Product Manual

1 Description

Server Board Features

The SCB2 is available in either SCSI or ATA hard drive interface versions as described in Table 1.
The features listed in Table 2 are common to both server board versions.
Table 1. Server Board Versions
Feature
SCSI
ATA
NOTE
The feature set listed in Table 2 only reflects usage with either the
®
1U Intel SR1200 or the 2U Intel
OEM chassis may not provide all of the features listed below.
Table 2.

Server Board Features

Feature
Processors
Memory
Graphics
Video Memory
PCI bus
Network
System I/O
(See Table 1)
Form Factor
Description
Dual channel Ultra160 LVD SCSI accessible at rear panel I/O and internally
Dual channel ATA 100 RAID
®
SR2200 server chassis. Third-party or
Description
Dual processor slots supporting Intel
Chip Pin Grid Array (FC-PGA) package.
Six dual inline memory module (DIMM) slots support:
SDRAM DIMMs: 133 MHz, ECC, registered, PC/133 compliant, 72-bit, 168-pin,
gold contact, 3.3V. A 1U chassis requires low-profile (LP) 1.2-inch DIMMs.
Up to 6 GB of memory in a 2U chassis.
Integrated onboard ATI RAGE
8 MB SDRAM of video memory
Two PCI riser slots capable of supporting either of the following configurations:
1U configuration—one full-length, full-height 64-bit/66-MHz PCI riser slot and one
Low Profile (LP) 64-bit/66-MHz PCI riser slot.
2U configuration—three full-length, full-height 64-bit/66-MHz PCI riser slots and
three LP 64-bit/66-MHz PCI riser slots.
Dual on-board 10/100 Network Interface Controllers (NIC)
†
One PS/2 keyboard/mouse port (6 pin DIN)
One VGA video port (15 pin)
Two external USB ports, internal header providing two additional USB
One external serial port (RJ-45), one internal COM 1 header
One external SCSI port (SCSI server board only), one internal
Two NIC ports (RJ-45)
Server ATX form factor
® ®
Pentium III processors in a Socket370 Flip
†
XL PCI 64 bit SVGA controller.
7