Attach The Heat Sink; Connect The Heat Sink Fan - Intel SCB2 - Server Board Motherboard Product Manual

10. Slowly close the locking lever (A) until it contacts tab (B).
NOTE
When using the boxed Intel Pentium III processor, compatible with the
SCB2S server board, it will come with a fan for the processor heat sink.
This fan cannot be used in a 1U server chassis. If you are integrating a
2U chassis, proceed to the next step.
11. Following the instructions provided with the processor, install the fan on the processor
heat sink.
12. Connect the fan to (A) if it is on the primary processor or to (B) if it is on the secondary
processor.
36
A
Figure 20. Attach the Heat Sink
A
CPU 1 Fan
Figure 21. Connect the Heat Sink Fan
B
OM11709A
B
CPU 2 Fan
OM12163
Intel Server Board SCB2 Product Guide