Configuring The Adaptec Aic-7899 Scsi Adapter; Running The Promise Fastbuild Utility - Intel SCB2 - Server Board Motherboard Product Manual

Use the following keys to navigate through the menus and submenus:
SCSISelect Navigation Keys
Press To
ESC Exit the utility
Enter Select an option
Return to a previous option
Move to the next option
F5 Switch between color and monochrome
F6 Reset to host adapter defaults

Configuring the Adaptec AIC-7899 SCSI Adapter

The Adaptec AIC-7899 SCSI adapter has two busses. Select the bus from the following menu:
Main Menu
Menu Item
You have an AIC-7899 adapter in your system. Move
the cursor to the bus:device:channel of the one for
configuration and press <Enter>.
<F5> - Toggle color/monochrome
After selecting the bus, the following menu displays:
Menu for each SCSI Channel
Host Adapter
AIC-7899 at
Bus:Device:Channel
01:06:A (or 01:06:B)
When you are finished, press <Esc> and make your selection from the following menu:
Exit Menu
Feature Option
Exit Utility? Yes
No

Running the Promise FastBuild Utility

This utility is only found on the SCB2 ATA model only.
The Promise ATA-100 host adapter is configured using the FastBuild † configuration utility that
allows you to configure/view the settings of the host adapter and set RAID configurations.
Configuration Software and Utilities
Options
Bus:Device:Channel
01:06:A
01:06:B
Option
Configure/View Host
Adapter Settings
SCSI Disk Utilities
Comment
When you finish configuring your SCSI devices, press <Esc>. Then select
Yes and press <Enter>. When this message appears:
Please press any key to reboot
Press any key, and the server reboots.
Comment
Press <Enter> to view the Configuration Menu.
Press <Enter> to view the SCSI Disk Utilities
Menu. This menu allows you to format hard
disks and/or verify disk media.
55