Security Menu; Table 16. Advanced Chipset Control Submenu; Table 17. Security Menu - Intel SE7501HG2 Product Manual

Table 16. Advanced Chipset Control Submenu
Feature
Wake On Ring
Wake On LAN
Wake On PME
Wake On RTC Alarm

Security Menu

You can make the following selections from the Security Menu. Enabling the Administrator
Password field requires a password for entering Setup. Passwords are not case-sensitive.
Table 17. Security Menu
Feature
User Password is
Administrator
Password is
Set Administrative
Password
Set User Password
Password on Boot
Fixed Disk Boot
Sector
70
Choices or
Display Only Description
Enabled Controls legacy wake-up source
Disabled
Enabled Controls legacy wake-up source
Disabled
Enabled Controls legacy wake-up source
Disabled
Enabled Controls legacy wake-up source
Disabled
Choices Description
Not Installed
Information only; once the password is set, it can be disabled by
Installed selecting the Set Administrative Password and then setting the
password to a null string, or by using the clear password jumper on the
board.
NOTE: The clear password jumper clears both the Administrator and
User passwords.
Not Installed
Information only; once the password is set, it can be disabled by
Installed selecting the Set Administrative Password and then setting the
password to a null string, or by using the clear password jumper on the
board.
NOTE: The clear password jumper clears both the Administrator and
User passwords.
<Enter> When the <Enter> key is pressed, you are prompted for a password;
press the ESC key to abort.
Once set, the password can be disabled by setting the password to a
null string, or by using the clear password jumper.
NOTE: If the clear password jumper is used, both the User and
Administrative passwords will be cleared.
Entering Setup with the Administrative Password provides full access to
all BIOS Setup utility menus.
<Enter> This option is available only if an Administrator Password is configured.
When the <Enter> key is pressed, you are prompted for a password;
press the ESC key to abort.
Once set, the password can be disabled by setting the password to a
null string, or by using the clear password jumper.
NOTE: If the clear password jumper is used, both the User and
Administrative passwords will be cleared.
Enabled Requires password entry before boot. System will remain in secure
Disabled mode until password is entered. This option is only available if a User
Password is configured.
None
When Write Protect is enabled, the boot sector of the hard drive is
Write Protect protected. This prevents viruses from corrupting the drive.
Intel Server Board SE7501HG2 Product Guide
continued