Removing A Processor - Intel SCB2 - Server Board Motherboard Product Manual

Removing a Processor

1. Observe the safety and ESD precautions at the beginning of this chapter and the additional
cautions given here.
2. If a heat sink fan is present, unplug it from the server board and remove it from the heat sink.
3. Disengage the retention clip from the processor socket by slowly opening the locking lever
until it is vertical.
4. Remove the processor from the socket.
5. If you removed the processor from the secondary socket and are not replacing it, you must
install a terminator in its place.
Upgrading 37