Installing From The Cd-Rom - HP D7171A - NetServer - LPr Installation Manual

Chapter 11

Installing from the CD-ROM

This is a 16-bit Windows application that can be run on Windows 3.1 and above. If you
are using Windows 95/98 or Windows NT, and have the AUTORUN feature of your
CD-ROM drive enabled, it will automatically start the setup program. If you have
previously installed this new version of HP NetServer Information Assistant on your
system, it will automatically launch the program.
If you have AUTORUN disabled or are installing this application on other versions of
Windows, run the SETUP.EXE program in the INFOASST directory by performing the
following steps:
1. Turn on your computer and CD-ROM drive.
2. Run Windows and display the Program Manager.
3. Insert the HP NetServer Online Documentation CD-ROM into the
CD-ROM drive.
4. From Program Manager, select Run.
5. In the RUN window, type the following:
drive : \INFOASST\setup
where drive is the letter of the CD-ROM drive.
6. Follow the instructions that appear on your screen.
In Program Manager, the Setup utility creates a new program group called
NetServer Information Assistant with an icon for running the application.
120
Information Assistant