Main Menu - HP D7171A - NetServer - LPr Installation Manual

Chapter 2
Table 2-3. Power Supply LED Status
Green LED
Steady Green
Flashing
Off

Main Menu

This is the status screen default display:
HP NetServer
LT 6000r
1. To reach the main menu from this default screen, press the Enter button.
NOTE
The status screen displays two lines of an entire menu at a
time.
This is the entire Main Menu:
***Main Menu****
>Event Log
>FW Info
>System Info
>Component Info
>Service
>Adjust Contrast
Menus beginning with a greater-than symbol (>) indicate submenu
selections.
2. Use the arrow buttons to move the cursor to your selection and press the
Enter button.
A cursor highlights the currently selected line.
3. To return to the Main Menu from one of these selections, press Escape.
4. To exit the Main Menu, press Escape.
NetServer Status:
The system is powered up.
The system is in stand-by or power-save mode.
The AC line is unplugged or the power supply
has failed (see Chapter 12, Troubleshooting).
Controls, Indicators, and Ports
13