HP D7171A - NetServer - LPr Installation Manual page 108

Chapter 10
l
Execute Card Utilities:
Use this function when Configuration Assistant detects installed boards
that have additional configuration utilities on the HP NetServer Navigator
CD-ROM. By selecting Execute on the Execute Board Utilities screen, you
can execute these utilities to complete the configuration of the boards.
Custom Configuration
Only select Custom if you are experienced in NetServer configuration and have a
preferred sequence of steps, or if you prefer to configure your system one
component at a time. In Custom configuration, you perform the same
configuration steps as provided in Express configuration mode, but these may be
performed in any order.
After you have selected the NOS, NOS version, and NOS installation mode
(automated or manual), and after you have viewed the Configuration Advisories,
the Custom Configuration screen displays the following items.
Essential Steps
l
Configure Remote Management:
This executes the Integrate Remote Assistant configuration utility.
l
Configure Disk Array:
This configures your HP disk array, but requires that you fill out the Disk
Array Configuration Worksheet before proceeding. Click Help for more
details.
l
Execute Card Utilities:
This executes the available configuration utilities for installed cards.
l
Create Drivers Diskette(s):
SCSI IDE HP NetRAID Adapter and video adapter drivers for Microsoft
Windows NT 4.0 on HP NetServers.
100
Configuring the HP NetServer