Installing Additional Memory; Introduction; Memory Guidelines - HP D7171A - NetServer - LPr Installation Manual

5 Installing Additional Memory

Introduction

This chapter explains how to add memory to the HP NetServer LT 6000r. The
NetServer is shipped from the factory with 256 MB of interleaved memory: one
128 MB DIMM in socket 1A, and one 128 MB DIMM in socket 1B. Expansion is
accomplished by adding pairs of equal size DIMMs in the appropriate sockets. Up
to 8 GB of memory can be installed in the NetServer.

Memory Guidelines

Use only DIMMs of the following sizes:
128 MB
256 MB
512 MB
1 GB
l
The maximum memory configuration is 8 GB.
Memory must be added in pairs of equal size. For example, a 1 GB DIMM
in socket 1A must be paired with a 1 GB DIMM in socket 1B.
You can mix DIMM sizes. For example, a 1 GB DIMM can be installed in
socket 1A, and a 256 MB DIMM can be installed in socket 2A.
Figure 5-1. System Board Memory Sockets
43